|
| |
TM 9-2320-304-14&P
2-102
Operating Instructions (Cont)
2-14. EMERGENCY PROCEDURES (CONT).
(6) As flatrack unloads, operator continues using main frame electrical override button (7). Weight
of flatrack and payload will continue until load is on ground. Operator will have to exercise
caution during this procedure. If flatrack is not fully on ground, the hook arm override
button (6) may be pressed until flatrack is on ground.
(7) In event of load returning to transport position on truck during main frame override button (7)
operation, the operation continues until LHS movement stops. The operator then presses the
hook arm override button (6) until the hook arm cylinders are in transport position. Operator
then moves hydraulic selector switch (8) to MAN TRANS position, which allows truck to be
driven. Flatrack and payload must be manually off-loaded. Refer to Para 2--13d.
(8) Install four screws (2), lockwashers (3), and LHS control box cover (4).
|
