|
| |
TM 9-2320-304-14&P
2-101
Operating Instructions (Cont)
NOTE
Operate electrical lowering override buttons by pressing and releasing buttons, which
controls movement of LHS.
(4) Locate electrical hook arm override button (6) and main frame override button (7).
CAUTION
Before depressing electrical lowering override buttons, direction of LHS payload movement
(load or unload) must be known.
NOTE
·
If flatrack and load center of gravity is over truck, load will return to transport
position. If flatrack and load center of gravity is over rear of truck, flatrack will
lower to the ground.
·
Under certain circumstances, an assist truck may be needed to aid in pulling
payload back if dug in.
(5) Press main frame override button (7) for unloading. Ground conditions will determine if
flatrack rolls/slides across ground or digs in. In event of digging in, operator should stop
electrical override button operation. If this condition exists, the load will have to be unloaded
manually.
|
