|
| |
TM 9-2320-304-14&P
2-80
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
NOTE
It may be necessary to repeat steps (14) through (18) several times to clear hook arm from
hook bar.
(14) Move the joystick (8) to LOAD position to allow top of lift hook (11) to clear hook bar (12).
NOTE
·
Do not move truck forward more than 3 in. (76.2 mm) to prevent flatrack from
pulling over edge of dock.
·
LHS will only operate when transmission range selector is in N (Neutral).
(15) Release the service brake pedal (3) and place transmission range selector (1) in D (Drive).
(16) Move truck forward approximately 3 in. (76.2 mm) and apply service brake pedal (3).
(17) Place transmission range selector (1) in N (Neutral).
(18) Move the joystick (8) to UNLOAD position to disengage hook (11) from hook bar (12).
(19) Place transmission range selector (1) in D (Drive), release the service brake pedal (3) and move
the truck forward approximately 5 ft. (1.5 m).
(20) Apply service brake pedal (3).
(21) Place transmission range selector (1) in N (Neutral).
(22) Move joystick (8) to LOAD position until LHS NO TRANSIT indicator (9) goes off, indicating
LHS is completely stowed.
|
