|
| |
TM 9-2320-304-14&P
2-79
Operating Instructions (Cont)
CAUTION
Engine speed must be at idle before using hydraulic selector switch or damage to equipment
may result.
(8) Turn the hydraulic selector switch (7) to MAN H.A. position.
(9) Move joystick (8) to LOAD position until front of flatrack is raised approximately 15 in. (38 cm)
above dock or bay.
(10) Turn the hydraulic selector switch (7) to MAN M.F. position.
(11) Move the joystick (8) to UNLOAD position until flatrack is positioned on dock or bay.
(12) Release the joystick (8).
CAUTION
Before moving truck, ensure hook is not engaged to hook bar or damage to equipment may
result.
(13) Apply the service brake pedal (3).
|
