|
| |
TM 9-2320-304-14&P
2-81
Operating Instructions (Cont)
CAUTION
Engine speed must be at idle before using hydraulic selector switch or damage to equipment
may result.
(23) Turn hydraulic selector switch (7) to OFF position.
(24) Put PTO ENGAGE switch (5) in OFF position. Make sure indicator light (6) goes off.
2-10. CONFIGURING FOR OVER-THE-ROAD OPERATIONS.
Before starting an over-the-road operation make sure that the hydraulic selector switch (1) and the PTO EN-
GAGE switch (2) are in OFF position. If AUTO circuits have failed and manual load operations were used, set
hydraulic selector switch (1) to MAN TRANS position.
|
