|
| |
TM 9-2320-304-14&P
2-55
Operating Instructions (Cont)
(2) Pull out PARKING BRAKE control (3) and place transmission range selector (4) in N (Neutral).
WARNING
Ensure trailer air system is pressurized before beginning transfer, or flatrack locks may not
properly disengage. Serious injury or death could result to personnel and damage to
equipment may result.
(3) Push in knob (5) and retract flatrack locks (6).
CAUTION
·
Engine speed must be at idle before using hydraulic selector switch or damage to
equipment may result.
·
Load must be evenly distributed on flatrack pallet. Uneven load distribution may
cause LHS OVER LOAD indicator to give false signals and cause LHS to operate
incorrectly.
NOTE
The time to load and unload is controlled by engine speed. Engine speed can be increased
to 1,500 to maximum rpm to reduce loading and unloading times.
(4) Put PTO ENGAGE switch (7) in ON position. Make sure indicator light (8) comes on.
(5) Turn the hydraulic selector switch (9) to MAN H.A. position.
|
