|
| |
TM 9-2320-304-14&P
2-54
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
h. Transfer of Flatrack to Trailer in Manual Mode.
WARNING
Trailer wheels must be chocked during transfer operations or serious injury or death to
personnel could result.
CAUTION
·
Ensure that trailer drawbar is down against the ground during transfer operations
or damage to equipment may result.
·
Ensure air lines and cables are properly stowed to prevent damage to equipment
(TM 9-2330-385-14).
·
Both of the trailer bumper points must be under the truck bumper stop flange and
at least one of the bumper points must contact the bumper stop. The trailer bumper
point not contacting the truck bumper stop cannot exceed 0.5 in. (12.7 mm) or
flatrack will miss main rail guides and equipment damage may result.
(1) Back up the truck so that trailer bumper (1) is under flange and contacts truck bumper stop (2).
|
