REAR WINDOW REPLACEMENT - TM-9-2320-303-24-20457

TM 9-2320-303-24-2

REAR WINDOW REPLACEMENT

0295 00

THIS WORK PACKAGE COVERS

Removal, Cleaning and Inspection, Installation

INITIAL SETUP

Maintenance Level

Materials/Parts - Continued

Detergent (Item 18, WP 0312 00)

Direct Support

Personnel Required

Tools and Special Tools

Two

Tool kit, general mechanic's (Item 102, WP 0313

References

00)

Gloves, welder's (Item 29, WP 0313 00)

Equipment Condition

Materials/Parts

Rear window guard removed (TM 9-2320-303-

Compound, sealing (Item 15, WP 0312 00)

10)

REMOVAL

WARNING

Wear protective gloves when handling glass. Failure to do so could result in injury to personnel.

NOTE

If removing rear window glass only, perform steps 1 through 3. If removing rear window glass and seal, per-

form steps 1 through 5.

If rear window glass (1) is cracked due to any cause other than being hit by a flying object, mark rubber extrusion (2) at

location of crack.

Using windshield pick, release locking strip (4) from rubber extrusion (2).

CAUTION

When handling glass, be careful not to nick or splinter edges. Chipped edges could cause cracking later.

Apply pressure to one edge of rear window glass (1) from inside of cab (3). Using windshield pick, lift and remove rear

window glass out of rubber extrusion (2).

Remove rubber extrusion (2) from cab (3).