REAR CAB MOUNTS REPLACEMENT

TM 9-2320-303-24-2

REAR CAB MOUNTS REPLACEMENT

0281 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts

Maintenance Level

Nut, lock (P/N M45913/1-6CG5C) (8)

General Support

Nut, lock (P/N M45913/1-10CG5C) (2)

Tools and Special Tools

Personnel Required

Two

Tool kit, general mechanic's (Item 102, WP 0313

Equipment Condition

Front cab mounts removed (WP 0280 00)

Sling, beam type (Item 85, WP 0313 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during

procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep

clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death

or injury to personnel.

Cab assembly weighs 1100 lb (499 kg). Use hoist with lifting capacity of 1400 lb (636 kg) to support

cab assembly. Failure to do so could result in injury to personnel and/or damage to equipment.

REMOVAL

Remove two locknuts (4) and washers (6). Discard locknuts.

Lift cab assembly (2) approximately 5 in (13 cm).

Remove two screws (5), washers (3), and resilient mounts (1).