FRONT CAB MOUNTS REPLACEMENT

TM 9-2320-303-24-2

FRONT CAB MOUNTS REPLACEMENT

0280 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Maintenance Level

Nut, lock (P/N MS51922-1) (4)

General Support

Nut, lock (P/N M45913/1-4CG5C) (4)

Tools and Special Tools

Nut, lock (P/N M45913/1-12CG5C)

Tool kit, general mechanic's (Item 102, WP 0313

Personnel Required

00)

Sling, beam type (Item 85, WP 0313 00)

Two

Materials/Parts

Equipment Condition

Clamp, seal (P/N 04-19249-000)

Fender extension removed (WP 0184 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to

personnel.

REMOVAL

NOTE

Procedure is the same for both sides, except as noted.

Perform step 1 on right side.

Remove seal clamp (1), v-clamp (3), and outlet pipe (2). Discard seal clamp.