 |
|||
|
|
|||
|
Page Title:
Remove Main Differential and Ring Gear Assembly |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0257 00
DIFFERENTIAL CARRIER DISASSEMBLY - CONTINUED
f.
Remove Main Differential and Ring Gear Assembly.
(1)
With the carrier (59) still in an upright position, loosen the jam nut (79) and back off the ring gear thrust
screw (78).
(2)
Rotate the carrier (59) 180 and bring the ring gear (77) to an upright position.
(3)
Check and record the backlash. This information will be needed in reassembly unless a new gear set is
used.
(4)
Center punch one differential carrier (59) leg and bearing cap (72) to identify for reassembly.
(5)
Remove the carrier cap capscrews (70), washers (71), and cotter pins (73) from both sides of the carrier.
Discard cotter pins.
(6)
Remove the bearing adjusting rings (74) and the carrier caps (72).
(7)
Remove cups (75) from ring gear assembly (77).
(8)
Lift out the differential and ring gear assembly (77).
72
70 71
74
75
76
73
70 71
72
59
75
74
77
73
78
79
402-230
0257 00-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals