 |
|||
|
|
|||
|
Page Title:
Disassemble Main Differential and Ring Gear Assembly |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0257 00
DIFFERENTIAL CARRIER DISASSEMBLY - CONTINUED
g.
Disassemble Main Differential and Ring Gear Assembly.
(1)
If original identification marks are not clear, mark the differential case halves with a punch or chisel for
correct alignment on reassembly.
IDENTIFICATION MARKS
80,81,82
402-663
(2)
Remove the lockwire (if used), capscrews (80), washers (81), and nuts (82). Separate the case halves.
(3)
Remove the spider (88) assembly.
(4)
Remove two side gears (83), two spring retainers (84), two springs (85) and two driven clutches (86) with
holdout ring (87) assemblies from spider (88) assembly.
86,87
86,87
85
88
84
85
84
83
83
402-664
(5)
If ring gear is to be replaced for any reason, remove rivets and separate the gear from the case, as follows:
(a) Carefully center-punch rivets in center of the head.
(b) Use a drill 1/32-inch smaller than body of rivet to drill through rivet head from gear side.
(c) Punch out the rivets.
(d) If necessary to replace differential bearings, remove with a suitable puller.
0257 00-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals