 |
|||
|
|
|||
|
Page Title:
FRONT STEERING KNUCKLE REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT STEERING KNUCKLE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Tags, marker (Item 42, WP 0312 00)
Direct Support
Bushing (P/N R210088) (2)
Tools and Special Tools
Gasket (P/N 3208-M-1027) (2)
Tool kit, general mechanic's (Item 102, WP 0313
Seal assembly (P/N A-1205-X-1428) (4)
Dial indicator set (Item 18, WP 0313 00)
Shim (P/N 2203-K-3001)
Driver, bushing (Item 22, WP 0313 00)
Shim (P/N 2203-L-3002)
Jack, hydraulic (Item 52, WP 0313 00)
References
Press, arbor (Item 71, WP 0313 00)
TM 9-2320-303-10
Wrench, torque, 15-75 lb-ft (Item 110, WP 0313
WP 0024 00
Equipment Condition
Tie rod removed (WP 0251 00)
Front cross tube arm removed (WP 0252 00)
Front steering arm removed (WP 0253 00)
NOTE
Procedure is the same for both steering knuckles.
REMOVAL
1.
If damaged, remove two lubrication fittings (3).
2.
Remove six cap screws (1), flat washers (2), two caps (6), gaskets (5), and seal assemblies (4). Discard gaskets and seal
assemblies.
3.
Remove two nuts (7).
1
2
3
7
6
5
4
4
5
7
6
2
1
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals