 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT STEERING KNUCKLE REPLACEMENT - CONTINUED
0254 00
REMOVAL - CONTINUED
NOTE
Tag draw keys prior to removal to aid in installation.
4.
Remove two draw keys (11).
CAUTION
Be careful when removing pin. If pin is dropped, damage may occur.
5.
Remove pin (8).
6.
Remove steering knuckle (9), thrust bearing (13), shim(s) (10), and seal assembly (12). Discard seal assembly and
shim(s).
9
10
11
11
12
13
8
7.
Remove two bushings (14) from steering knuckle (9). Discard bushings.
14
9
INSTALLATION
1.
Using bushing driver, install two new bushings (14) as follows:
a.
Press bushing (14) into steering knuckle (9) 1/8 in (3.2 mm) and relieve pressure.
b.
Press bushing (14) into steering knuckle (9) another 1/2 in (12.7 mm) and relieve pressure.
0254 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals