|
|
TM 9-2320-303-24-1
TRANSMISSION TROUBLESHOOTING
THIS WORK PACKAGE COVERS
Transmission, Transfer Case, and Driveline Systems Troubleshooting Procedures, WTEC III Electronic Controls Trouble-
shooting Manual
INITIAL SETUP
Tools and Special Tools
Tools and Special Tools - Continued
PC Card, transmission (Item 66, WP 0313 00)
MSD/ICE (Item 58, WP 0313 00)
Tester, Pro-link, diagnostic reader (Item 99, WP
SPORT/ICE (Item 92, WP 0313 00)
NOTE
In addition to the transmission troubleshooting located in Table 1 below, the Allison Transmission Trouble-
shooting Manual is duplicated in its entirety and is located beginning on page 0021 00-7. An index of trou-
bleshooting diagnostic codes is on page 0021 00-36.
Table 1. Transmission Troubleshooting Procedures
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION
1.
Shift Selector Display Is Blank.
1. Check if VIM fuse is blown.
Replace VIM fuse (WP 0072 00).
2. Check for damaged or loose Tighten or repair battery
battery connections.
connections (WP 0095 00).
3. Check for blown fuse or fusible Replace battery fuse or fusible
link at battery.
link (WP 0073 00).
2.
Vehicle Does Not Start (Engine Does Not 1. Check that shift selector is in N Press N (Neutral) on shift selector
Crank).
(Neutral).
and restart vehicle (TM 9-2320-
303-10).
2. Check for dead battery.
Recharge battery as necessary TM
9-6140-200-14).
3. Check for damaged or loose Tighten or repair battery
battery connections.
connections (WP 0095 00).
4. Faulty starter circuit.
Repair vehicle starter circuit (WP
5. Faulty neutral start relay.
Replace neutral start relay (WP
6. Faulty wiring in neutral start Repair wiring (WP 0098 00).
circuit.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |