|
|
TM 9-2320-302-20-2
FIBER OPTIC LIGHT SOURCE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts
Straps, tiedown (Item 33, WP 0305 00)
Tool kit, general mechanic's (Item 50, WP 0306 00)
Equipment Condition
Wrench set, socket attachment (Item 61, WP 0306
Center gage panel removed (WP 0074 00)
REMOVAL
1.
Remove nut (1), torx screw (2), and fiber optic light source (6).
2.
Turn light socket (4) to left and remove from fiber optic light source (6).
3.
Remove tiedown strap (5) and discard.
CAUTION
Do not crimp fiber optic lines. Crimping could cause lines to break internally, resulting in instrument light
failure.
4.
Release two latches (3) on rear of fiber optic light source (6) and remove four fiber optic lines (7).
3
4
1,2
5
6
7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |