TRANSMISSION PROPELLER SHAFT

TM 55-1740-200-14

g. Replace damaged fittings.

4-442. TRANSMISSION PROPELLER SHAFT.

4-443. REPAIR. Refer to paragraph 4-165 for inspec-

h. Replace nonrepairable parts.

tion and repair the transmission propeller shaft in accord-

i. Install in accordance with paragraph 4-598.

ance with the following procedures. (See figure 4-39.)

a. Remove nick and scores from spider bearing sur-

4-450. Refer to paragraph 4-458 for repair instructions

faces with fine handstone.

on brake drums and brake shoes.

4-451. MASTER CYLINDER

b. Remove light scores from bearings with crocus

cloth.

4-452. REPAIR. Refer to paragraph 4-181 for inspec-

c. Replace nonrepairable parts.

tion and repair the master cylinder in accordance with the

following procedures. (See figure 4-43.)

d. Install in accordance with paragraph 4589.

a. Repair master cylinder by installing kit components.

4-444. AXLE PROPELLER SHAFTS.

b. Replace complete cylinder assembly if kit installa-

4-445. REPAIR. Refer to paragraph 4-169 for inspec-

tion fails to provide proper operation.

tion and repair the axle propeller shafts in accordance

with the following procedures. (See figure 4-40.)

c. Reassemble in accordance with paragraph 4-600.

a. Repair the axle propeller shafts using the procedures

4-453. VACUUM BOOSTER.

in paragraph 4-443 a. through c.

4-454. REPAIR. Refer to paragraph 4-185 for inspec-

b. Install in accordance with paragraph 4-592.

tion and repair the vacuum booster in accordance with

the following procedures. (See figure 4-44.)

4-446. TRANSFER TRANSMISSION.

a. Replace all broken or distorted springs.

4-447. REPAIR. Refer to paragraph 4-173 for inspec-

tion and repair the transfer transmission in accordance

b. Replace all deteriorated nonmetallic components.

with the following procedures. (See figure 4-41.)

c. Remove nicks and burrs from pistons and valve ball

with crocus cloth.

a. Replace external seals and gaskets.

d. Clean all oil passages.

b. Reassemble in accordance with paragraph 4-594.

e. Remove minor dents from shell.

4-448. BRAKE SYSTEM.

f. Replace nonrepairable components.

4-449. REPAIR. Refer to paragraph 4-177 for inspec-

tion and repair the brake system in accordance with the

g. Reassemble in accordance with paragraph 4-603.

following procedures. (See figure 4-42.)

a. Clean vacuum booster air filter.

4-455. AXLE DIFFERENTIAL.

b. Replace distorted pedal return spring.

4-456. REPAIR. Refer to paragraph 4-189 for inspec-

tion and repair the axle differential in accordance with

c. Straighten brake pedal lever.

the following procedures. (See figures 4-45 and 4-46.)

d. Replace or straighten bent tube clips.

a. Remove nicks and scores from bearing surfaces with

e. Replace all restricted tubes.

crocus cloth.

f. Replace deteriorated or broken hoses.

b. Replace worn or damaged seal.

4-109