 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
PAVEMENT BREAKER REPAIR (CONT)
11.
PLACE SPACER on base of press. APPLY
COAT of GAA to entire BORE of flow sleeve
TUBE (23) and PLACE on SPACER with
packing groove facing up.
12.
PRESS flow SLEEVE (24), wide groove end
first, into flow sleeve tube (23) until top of
flow sleeve (24) is FLUSH with top of flow
sleeve tube (23).
INSTALL four PINS (25), tapered end first, in
13.
flow sleeve tube (23).
INSTALL new PACKING (26) on flow sleeve
tube (23).
15.
INSTALL two PINS (27), tapered end up, in
automatic body (28).
16.
INSTALL automatic VALVE (28) In automatic
body (28).
17,
INSTALL PIN (30) In flow sleeve tube (23).
18,
INSTALL automatic BODY (28) in flow sleeve
tube (23), ALLOW automatic VALVE (28) to
DROP and pilot Into bore of flow sleeve tube
(23).
19.
USING suitable PRESS, with metal plate on
top of automatic body (28), INSTALL
automatic BODY (28) in flow sleeve tube (23)
until bottom edge of side holes in automatic
body (28) are TOUCHING flow sleeve tube
(23).
21-32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals