 |
|||
|
|
|||
|
Page Title:
Section XXV. FORKLIFT LIFT CYLINDER REPAIR |
|
||
| ||||||||||
|
|
 TM 5-2420-224-34
Section
XXV.
LIFT
CYLINDER
REPAIR
LIFT
CYLINDER
REPAIR
This task covers:
a. Disassembly b. Assembly
INITIAL SETUP
Personnel Required: (2)
Applicable Configuration:
HMMH
References:
LO 5-2420-224-12
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
Equipment Condition:
Tool Kit, SC 5180-90-CL-N26
Tool Outfit (HSTRU), NSN 4940-01-036-5784
Reference
Condition Description
Forklift Lift Cylinder
Materials/Parts:
Removed
Nut, Lock
General Safety Instructions:
Pin, Cotter
Nut, Lock
WARNING
Kit
F u e l and oil are slippery and
can cause falls. To avoid
Kit
i n j u r y , wipe up spilled fuel or
Appendix B, Item 8
Caps and Plugs
oil with rags.
Oil, Lubricating
Appendix B, Item 30
Rags
Appendix B, Item 40
DISASSEMBLY
1.
USING spanner WRENCH, REMOVE RETAINER (1) from tube (2).
REMOVE and DISCARD WIPER (3), RING (4), SEAL (5), backup RING (6), and O-RING (7) from
2.
retainer (1).
3.
USING spanner WRENCH, REMOVE RETAINER (8) from tube (9).
4.
REMOVE and DISCARD WIPER (10), RING (11), SEAL (12), backup RING (13), and O-RING (14)
from retainer (8).
USING spanner WRENCH, REMOVE RETAINER (15) from housing (16).
5.
REMOVE and DISCARD WIPER (17), RING (18), SEAL (19), backup RING (20), and O-RING (21)
6.
from retainer (15).
NOTE
All three tubes must be removed as an assembly.
REMOVE TUBE assembly (22) from housing (16).
7.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals