CHAPTER 16. FRONT AND REAR AXLES REPAIR INSTRUCTIONS

TM 5-2420-224-34

CHAPTER 16

FRONT AND REAR AXLES REPAIR INSTRUCTIONS

OVERVIEW

This chapter contains maintenance instructions for repair of the front and rear axles. A list of sections

contained in this chapter is shown below.

Page

Section I.

Axle Repair .................................................................................................................

16-1

Section II. Steering Knuckle and Front Axle Drive Repair ..........................................................

16-25

Section I. AXLE REPAIR

AXLE REPAIR

This task covers:

a. Disassembly

b. Inspection

c. Assembly

INITIAL SETUP

Compound, Sealing

Appendix B, Item 16

Tools and Special Equipment:

Oil, Lubricating

Appendix B, Item 30

Shop Equipment, SC 4910-95-CL-A31

Tool Kit, SC 5180-90-CL-N26

Brass Bearing(s)

Shop Equipment, SC 4910-95-CL-A63

Adjusting Tool, P/N 425 589 00 21 00

Equipment Condition:

Holding Device, P/N 425 589 00 31 00

Installation Tool, P/N 406 589 03 14 00

Reference

Condition Description

Installing Tool, P/N 406 589 02 43 00

Axle Mounted on Stand

Installing Tool, P/N 406 589 03 43 00

Installing Tool, P/N 441 589 06 43 00

Mandrel, P/N 406 589 04 15 00

General Safety Instructions:

Puller, P/N 000 589 35 33 00

Puller, P/N 000 589 68 33 00

WARNING

Test Device, P/N 401 589 01 25 00

Adhesive causes immediate

Wrench, P/N 000 589 64 03 00 or

bonding on contact with eyes,

P/N W0-00640-300

skin, or clothing and also gives

Wrench, P/N 001 589 80 21 00

off harmful vapors.

Wear

Materials/Parts:

protective goggles and use in

well-ventilated area. If adhesive

Packing

gets in eyes, try to keep eyes

Spacer, Tube

open; flush eyes with water for

Cord, Sealing

15 minutes and get immediate

medical attention.

Ring, Seal

Shim(s)

Packing (2)

Change 1

16-1