 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
TRANSMISSION REPAIR (CONT)
FROM notch in SLOTTED NUT WRENCH,
128.
COUNT to RIGHT number of increments on
BUSHING GUIDE, as determined in STEP
127, and MARK BUSHING GUIDE.
ENGAGE first GEAR and TURN main gear
129.
SHAFT assembly (129) to RIGHT until notch
on SLOTTED NUT WRENCH alines with
mark determined in STEP 128.
REPEAT STEPS 120 thru 125.
130.
ADD 0.0008 in. (0.02 mm) to reading from
131.
STEP 123. This equals number of
increments to be counted on BUSHING
GUIDE.
FROM MARK made in STEP 126, COUNT
132.
to RIGHT number of increments on
BUSHING GUIDE, as determined in STEP
131, and MARK BUSHING GUIDE.
133.
ENGAGE first GEAR and TURN main gear
S H A F T assembly (129) to RIGHT until
increment marked in STEP 132 is at notch
on BUSHING GUIDE. If main gear shaft is
turned too far, REPLACE crushable SLEEVE
(206) and REPEAT STEPS 119 thru 132.
INSTALL PLUG (21 6) in rear of main gear
134.
shaft assembly (129).
REMOVE cotter PIN (52) and POSITION
135.
shift controls to neutral. DISCARD cotter
PIN.
136.
SELECT forward and reverse GEARS and
M E A S U R E GAPS A and B with feeler
GAGE.
15-50
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals