 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 5-2420-224-34
CYLINDER HEAD REPAIR (CONT)
3.
U S I N G WRENCH, REMOVE six stepped
SPACERS (4) and six packings (5). DISCARD
PACKINGS.
NOTE
Procedure is the same for all
valves.
4.
C O M P R E S S SPRING (6) and REMOVE
COLLET (7).
NOTE
Tag valves after removal to aid in
installation.
RELEASE SPRING (6) and REMOVE retainer
5.
(8), spring (6), washer (9), and VALVE (10).
NOTE
Perform steps 6 thru 11 to
determine if valve guides are to
be replaced.
6.
USING 9-mm REAMER, REMOVE carbon
DEPOSITS from intake valve guide (11).
7.
INSTALL 9-mm MANDREL in intake valve
guide (11). Fit should be SNUG. There is NO
allowable TOLERANCE.
REPEAT STEPS 6 and 7 for each intake
8.
valve guide.
9.
USING 10-mm REAMER, REMOVE carbon
DEPOSITS from exhaust valve guide (12).
13-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals