|
|
![]() TM 5-2420-224-34
FORKLIFT CARRIAGE ASSEMBLY REPLACEMENT (CONT)
10. REMOVE four bolts (18), two retainers (19),
two carriage load BEARINGS (16 and 17),
and spacers (20).
11. REMOVE four bearings (21, 22, 23, and 24).
1.
Inspect bearings for excessive wear, flat
spots, and cracks. If any of these conditions
are present, replace bearing.
2.
Inspect roller bearings by turning them on
their shafts. Replace rollers with roughness or
noticeable restrictions to turning.
Inspect all welds in carriage. Replace carriage
3.
assembly if any welds are cracked.
4.
Inspect stub shafts for damage or cracks. If
either of these conditions are present, replace
carriage assembly.
Inspect forklift carriage chains (page 11-67).
5.
11-47
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |