 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
REAR FRAME SECTION AND SUBFRAME REPLACEMENT (CONT)
2.
INSTALL rear frame SECTION (2), pin (3),
and two retaining rings (4) on subframe (5).
NOTE
Rear frame section and subframe
must be installed as an assembly.
INSTALL SUBFRAME (5) and rear frame
3.
SECTION (2) as an assembly.
NOTE
Steps 4 thru 6 are the same for
both sides of vehicle.
INSTALL BRACKET (6), two capscrews (7),
4.
two new lock washers (8), and two nuts (9) in
rear frame section (2).
APPLY COAT of SEALING COMPOUND to
5.
f o u r SCREWS (10) and INSTALL four
washers (11) and four SCREWS (10) in rear
frame section (2). TIGHTEN TOP SCREWS to
1 5 0 Ib-ft (203 N.m). TIGHTEN LOWER
SCREWS to 220 Ib-ft (298 N.m).
8-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals