 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
REAR AXLE FINAL DRIVE HUB GEARS AND AXLE SHAFT
REPLACEMENT (CONT)
13. MEASURE and RECORD dimension C.
14. ADD A from step 2 and C from step 13.
15. SUBTRACT total in step 14 from B in step 12
to determine shim thickness.
"
16. INSTALL axle SHAFT (14) and new SEAL
(14A).
")
+
17. INSTALL SHIM(S) (15) per step 15.
WARNING
Adhesive causes immediate
bonding on contact with eyes,
skin, or clothing and also gives
off harmful vapors.
Wear
protective goggles and use in
well-ventilated
area.
If
adhesive gets in eyes, try to
keep eyes open; flush eyes
with water for 15 minutes and
get immediate attention.
18. APPLY COAT of SEALING COMPOUND
of rear axle final drive housing (16). APPLY
COAT of SEALING COMPOUND (Appendix
INSTALL rear axle final drive HOUSING (16)
and two screws (17). Tighten SCREWS to
75 lb-ft (100 N.m).
19. FILL rear axle final drive HUB with gear oil
(LO 5-2420-224-12).
20. INSTALL drain PLUG (18).
NOTE
Follow-on Maintenance:
Install rear brake calipers (TM 5-
2420-224-20).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals