 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
STEERING KNUCKLE AND FRONT AXLE FINAL DRIVE REPLACEMENT
(CONT)
4.
INSTALL final DRIVE (6) and propeller
SHAFT assembly (7) in axle (8).
5.
INSTALL new seal ring (9), new BUSHING
(10), and new seal ring (11).
WARNING
Adhesive causes immediate
bonding on contact with eyes,
skin, or clothing and also gives
off harmful vapors.
Wear
protective goggles and use in
well-ventilated area. If adhesive
gets in eyes, try to keep eyes
open; flush eyes with water for
15 minutes and get immediate
medical attention.
6.
APPLY COAT of SEALING COMPOUND to
three CAPSCREWS (12 and 13).
7.
INSTALL LINK (14), steering ARM (15),
capscrew (12), and two expansion capscrews
(13). TIGHTEN two CAPSCREWS (13) to
295 lb-ft (400 N.m). TIGHTEN CAPSCREW
(12) to 133 lb-ft (180 N.m).
8.
INSTALL HOSE (16), two new seals (17),
and bolt (18).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals