 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
FRONT AXLE THRUST ARMS REPLACEMENT (CONT)
NOTE
Procedure is the same for both
front axle thrust arms.
1.
APPLY COAT of SEALING COMPOUND to
SCREW (1) and INSTALL front axle thrust
ARM (2), screw (1), two new spring tension
washers (3) (with concave side facing away
from nut), and nut (4). TIGHTEN NUT to 184
lb-ft (250 N.m).
2.
APPLY COAT of SEALING COMPOUND to
two SCREWS (5) and INSTALL two screws
(5), four new lock washers (6) (with concave
sides facing each other), and two nuts (7).
TIGHTEN NUTS to 184 lb-ft (250 N.m).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals