FUSE HOLDER TO HYDRAULIC SUSPENSION LOCKOUT/REAR WALL WIRING HARNESS REPLACEMENT -714670241

TM 5-2420-224-34

FUSE HOLDER TO HYDRAULIC SUSPENSION LOCKOUT/REAR WALL

WIRING HARNESS REPLACEMENT

This task covers:

a. Removal b. Installation

General Safety Instructions:

Applicable Configuration:

HMMH (Reg. No. UC053E thru UC053K)

WARNING

Tools and Special Equipment:

R e m o v e or disconnect batteries

and turn vehicle MASTER

Shop Equipment, SC 4910-95-CL-A31

Tiil Kit, SC 5180-90-CL-N26

d i s c o n n e c t switch OFF prior to

performing maintenance in

References:

immediate battery area or

working on electrical system.

TM 5-2420-224-20

Such disconnections prevent

e l e c t r i c a l shock to personnel or

Equipment Condition:

equipment.

Reference

Condition Description

TM 5-2420-224-20

Fuse Holders Removed

Passenger Seat and

TM 5-2420-224-20

Framework Removed

NOTE

Wiring harnesses and leads are secured to vehicle with loop clamps and screw

terminals.

Only remove hardware securing wiring harness or lead to be removed.

REMOVE fuse holder to hydraulic suspension Iockout/rear wall wiring HARNESS using illustration and

legend as a guide.

NOTE

Make sure fuse holder to hydraulic suspension lockout/rear wall wiring harness is secure

and all hardware is tight.

INSTALL fuse holder to hydraulic suspension lockout/rear wall wiring HARNESS using illustration and legend

as a guide.

NOTE

Follow-on Maintenance:

Install fuse holders (TM 5-2420-224-20).

Install passenger seat and framework (TM 5-2420-224-20).