CAB FLOOR SEPARATION POINT TO REAR WALL WIRING HARNESS REPLACEMENT

TM 5-2420-224-34

CAB FLOOR SEPARATION POINT TO REAR WALL WIRING HARNESS

REPLACEMENT

a. Removal b. Installation

This task covers:

General Safety Instructions:

Applicable Configuration:

HMMH

WARNING

TooIs and Special Equipment:

R e m o v e or disconnect batteries

and turn vehicle MASTER

Shop Equipment, SC 4910-95-CL-A31

Tool Kit, SC 5180-90-CL-N26

d i s c o n n e c t switch OFF prior to

performing maintenance in

Materials/Parts:

immediate battery area or

working on electrical system.

Strap, Tiedown

Such disconnections prevent

e l e c t r i c a l shock to personnel or

References:

equipment.

TM 5-2420-224-20

Equipment Condition:

Reference

Condition Description

TM 5-2420-224-20

Passenger Seat and

Framework Removed

NOTE

Wiring harnesses and leads are secured to vehicle with tiedown straps, loop clamps,

and screw terminals. Discard tiedown strap(s).

Z Only remove hardware securing wiring harness or lead to be removed.

REMOVE cab floor separation point to rear wall wiring HARNESS using illustration and legend as a guide.

NOTE

Make sure cab floor separation point to rear wall wiring harness is secure and all

hardware is tight.

Z Install new tiedown strap(s).

INSTALL cab floor separation point to rear wall wiring HARNESS using illustration and legend as a guide.