CAB FLOOR SEPARATION POINT TO HYDRAULIC SUSPENSION LOCKOUT WIRING HARNESS REPLACEMENT

TM 5-2420-224-34

CAB FLOOR SEPARATION POINT TO HYDRAULIC SUSPENSION

LOCKOUT WIRING HARNESS REPLACEMENT

This task covers:

a. Removal b. Installation

INITIAL SETUP

General Safety Instructions:

Applicable Configuration:

HMMH

WARNING

Tools and Special Equipment:

R e m o v e or disconnect batteries

and turn vehicle MASTER

Shop Equipment, SC 4910-95-CL-A31

Tool Kit, SC 5180-90-CL-N26

d i s c o n n e c t switch OFF prior to

performing maintenance in

Materials/Parts:

immediate battery area or

working on electrical system.

Gasket

Such disconnections prevent

Strap, Tiedown

e l e c t r i c a l shock to personnel or

equipment.

NOTE

Z Discard gasket.

Wiring harnesses and leads are secured to vehicle with tiedown straps, loop clamps,

and screw terminals. Discard tiedown strap(s).

Only remove hardware securing wiring harness or lead to be removed.

REMOVE cab floor separation point to hydraulic suspension lockout wiring HARNESS using illustration and

legend as a guide.

NOTE

Make sure cab floor separation point to hydraulic suspension lockout wiring harness

is secure and all hardware is tight.

Install new tiedown strap(s).

Install new gasket.

INSTALL cab floor serparation point to hydraulic suspension lockout wiring HARNESS using illustration and

legend as a guide.