FORKLIFT CONNECTOR TO FUSE HOLDER WIRING HARNESS REPLACEMENT

TM 5-2420-224-34

FORKLIFT CONNECTOR TO FUSE HOLDER WIRING HARNESS

REPLACEMENT

a. Removal b. Installation

This task covers:

General Safety Instructions:

Applicable Configuration:

HMMH (Reg. No. UC053L and on)

WARNING

Tools and Special Equipment:

R e m o v e or disconnect batteries

and turn vehicle MASTER

Shop Equipment, SC 4910-95-CL-A31

Tool Kit, SC 5180-90-CL-N26

d i s c o n n e c t switch OFF prior to

performing maintenance in

Materials/Parts:

immediate battery area or

working on electrical system.

Strap, Tiedown

Such disconnections prevent

e l e c t r i c a l shock to personnel or

References:

equipment.

TM 5-2420-224-20

Equipment Condition:

Condition Description

Reference

Fuse Holders Removed

TM 5-2420-224-20

Air Cleaner Ducts

TM 5-2420-224-20

Removed

NOTE

Wiring harnesses and leads are secured to vehicle with tiedown straps, loop clamps,

and screw terminals. Discard tiedown strap(s).

Only remove hardware securing wiring harness or lead to be removed.

REMOVE forklift connector to fuse holder wiring HARNESS using illustration and legend as a guide.

NOTE

Make sure forklift connector to fuse holder wiring harness is secure and ail hardware

is tight.

install new tiedown strap(s).

INSTALL forklift connector to fuse holder wiring HARNESS using illustration and legend as a guide.