 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
AXLE THRUST TUBE REPLACEMENT
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Reference
Condition Description
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N26
Page 5-1 or 6-1
Front or Rear Axle
Guide, P/N 406 589 01 59 00
Assembly Removed
Installer, P/N 435 489 01 35 00
Page 5-14 or 6-12
Front or Rear Axle Thrust
Installing Tool, P/N 406 589 03 59 00
Arms Removed
Puller, P/N 000 589 34 33 00
Puller, P/N 000 589 63 33 00
Front or Rear Propeller
Shaft Removed
Materials/Parts:
General Safety Instructions:
Housing
Washer, Lock (4)
WARNING
Seal
Axle thrust tube weighs 55
Packing
pounds (25 kilograms).
To
Shim(s)
avoid personal injury, use a
Seal (2)
hoist or suitable lifting device
Compound, Sealing
Appendix B, Item 15
when lifting axle thrust tube.
Grease, Molybdenum
Appendix B, Item 24
Disulfide
Twine, Cotton 4 Ft Long
Appendix B, Item 49
REMOVAL
NOTE
Procedure is the same for both
thrust tubes.
1.
REMOVE eight bolts (1) and axle thrust
TUBE (2) from pinion shaft assembly (3).
2.
REMOVE and DISCARD HOUSING (4).
3.
LOOSEN CLAMP (5) and CLAMP (6).
4.
REMOVE four nuts (7), four lock washers (8),
HOUSING (9), and HOUSING (10). RETAIN
lock WASHERS.
5.
REMOVE BELLOWS (11) and two clamps (5
and 6).
6.
REMOVE FITTING (12) from HOUSING (9).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals