 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
ENGINE REPLACEMENT (CONT)
NOTE
Leave engine 2.0-2.5 in. (50-60
&
mm) off front mounts to allow
$
clearance for installation of engine
to transmission.
7.
INSTALL nine bolts (3)
and
three
BRACKETS (5, 6, and 7).
8.
INSTALL two nuts (8).
!
%
#
NOTE
Some vehicles may have two nuts
and two studs, instead of two
bolts.
9.
INSTALL two BOLTS (10) to underside of
engine and transmission.
TIGHTEN 11
BOLTS (3 and 10) and two NUTS (8) to 31
lb-ft (42 N.m).
10. REMOVE
SUPPORT
from
under
transmission.
11. LOWER ENGINE onto mounts and INSTALL
two bolts (12) and two new lock nuts (13).
12. INSTALL power steering oil TANK (14), two
nuts (15), and two screws (16).
13. REMOVE lifting DEVICE and TIGHTEN four
NUTS (13 and 15) to 104 15 lb-ft (140 20
N.m).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals