FRONT LOADER-continued -714670065

TM 5-2420-224-34

Table 2-1. Troubleshooting (Cont)

Malfunction

Test or inspection

Corrective Action

FRONT LOADER (CONT)

NOTE

Make sure spool end bottoms out completely.

install new packing (16), spring retainer (15), spring (14), spring retainer

(13), and spool end (12) in housing (5).

g. Coat bore of housing (5) with GAA and install housing (5) on control

valve (11).

h. install two socket head capscrews (10) in housing (5).

Fill two detent holes (17) with GAA.

NOTE

During steps j and k, install socket head screws only three turns.

install ball (9), spring (8), and socket head screw (7) in top of housing

(5).

k. install ball (4), spring (3), and socket head screw (2) in bottom of

housing (5).

Tighten two socket head screws (7 and 2) until slight resistance is felt.

m. Engage loader lift lever in cab in float position and make sure float lock

is achieved.

2-30