STEERING SYSTEM -714670049

TM 5-2420-224-34

Table 2-1. Troubleshooting (Cont)

Malfunction

Test or inspection

Corrective Action

STEERING SYSTEM

NOTE

Before troubleshooting steering system, check oil level with engine running. Oil that foams

easily is not recommended due to its tendency to retain air.

19. STEERING HARD TO MOVE FULL RIGHT AND LEFT.

NOTE

Perfom the following steps on both steering knuckles.

Step 1. Check for proper steering knuckle lubrication as follows:

Remove two capscrews (1), two washers (2), clamp (3), cap (4), and

lubrication fitting (5). Discard lubrication fitting.

b. Remove and discard washer(s) (6) and seal ring (7).

c. Visually check for proper lubrication of steering knuckle (8).

If steering knuckle is properly lubricated, reassemble parts and

go to step 2.

If steering knuckle is not properly lubricated, replace parts in

Bearing Parts Kit, P/N 419-330-0012 (page 16-25).