CHAPTER 2. DIRECT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS

TM 5-2420-224-34

CHAPTER 2

DIRECT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS

SCOPE

This chapter contains information for troubleshooting the SEE/HMMH, as well as general

maintenance instructions. The following sections are included in this chapter:

Page

Repair Parts, Special Tools; Test, Measurement, and . . . . . . . . . . 2-1

Section I.

Diagnostic Equipment (TMDE); and Support Equipment

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section Il.

Section Ill.

General Maintenance Instructions . . . . . . . . . . . . . . . . . . . . . . .

Section IV. General Hydraulic System Repair Methods . . . . . . . . . . . . . . . .

Section I. REPAIR PARTS, SPECIAL TOOLS;

TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE);

AND SUPPORT EQUIPMENT

OVERVIEW

This section includes information on tools and equipment you need to support the SEE and

HMMH tractors.

COMMON TOOLS AND EQUIPMENT

For authorized common tools and equipment, refer to the Modified Table of Organization and

Equipment (MTOE) applicable to your unit. Tool kits required for each task in this manual are

listed on the INITIAL SETUP page of each task.

SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

Special tools required to maintain the SEE/HMMH are listed in the Maintenance Allocation Chart

(TM 5-2420-224-20) and on the INITIAL SETUP page of each task. Special tools are also listed in

the Repair Parts and Special Tools List (TM5-2420-224-24P). Tools that are to be fabricated are

described and listed in Appendix C of this manual.

REPAIR

PARTS

Repair parts are listed and illustrated in the Repair Parts and Special Tools List (TM5-2420-224-24P).

2-1