|
|
TM
5-2420-224-20-1
Table 3-5. Troubleshooting (Cont)
Malfunction
Test or Inspection
Corrective Action
ELECTRICAL SYSTEM (CONT)
Step 8. Disconnect connector G (13) and check for +24 VDC between wire 41HR
(12) and ground.
If +24 VDC is present, repair wiring 41HR between
connector G and auxiliary light control switch.
If +24 VDC is not present, reconnect connector G and go to
step 9.
Step 9. Check for +24 VDC between wire 41HR (12) and ground at fuse box 2 (14).
If +24 VDC is not present, replace fuse.
If +24 VDC is present, repair wiring 41HR between fuse box 2
and connector G.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |