Machine Hydraulic Tools

TM 5-2420-224-20-1

MACHINE

(HYDRAULIC)

TOOLS

Chain Saw (SEE). The chain saw is used for debranching, pruning, and removal of trees and

wood products. The 15-in. bar allows cutting of wood up to 30 in. in diameter. Squeezing the

trigger controls the speed of the chain saw.

Pavement Breaker (SEE). The pavement breaker is used for breaking and chipping concrete,

rock, pavement, and hard ground. The pavement breaker uses moil points, spade, and chisel

attachments for breaking and chipping. Squeezing the trigger activates the pavement breaker.

Hammer Drill (SEE). The hammer drill is used for drilling holes in rock, concrete, or asphalt

3/4, 1, or 2 in. (12.7, 25.4, or 50.8 mm) in diameter. A switch controls the direction the tool

operates. Squeezing the trigger activates and controls the speed of the hammer drill.

Impact Wrench (HMMH). The impact wrench is used for removing and installing hardware from

containers and other equipment. A lever controls the direction and the trigger controls the speed of

the impact wrench.

1-17/(1-18 Blank)