|
| |
TM 5-2420-222-34
7-2.
ENGINE STARTER REPAIR (Con’t).
CAUTION
Be careful not to damage brushes during assembly of armature and main housing.
Hold brushes clear of armature commutator until armature is in position.
34.
Aline match-marks. Hold brushes (32 and 38) clear of commutator (58) and position electromagnetic relay (7),
drive housing (1), and armature (9) with assembled parts in place in main housing (2). Release brushes.
35.
With brushes (38) against commutator (58), loosen two drive screws (27) and allow brushes to seat on
commutator, then tighten screws.
TA701355
7-27
|
