|
| |
TM 5-2420-222-34
4-4.
CLUTCH DISK CARRIER OR CLUTCH SUPPORT BEARING CARRIER MAINTENANCE (Con’t).
c.
CLEANING AND INSPECTION
1.
Use a vacuum cleaner to remove dust particles from parts.
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-59°C). If
you become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts eyes, immediately wash your eyes and get
medical aid.
2.
Using rags and dry cleaning solvent, wipe carrier clean, then dry thoroughly with clean rags.
3.
Inspect carrier for cracks, breaks, and abnormal bends. Replace if defective.
TA701315
4-19
|
