|
| |
TM 5-2420-222-34
4-4.
CLUTCH DISK CARRIER OR CLUTCH SUPPORT BEARING CARRIER MAINTENANCE (Con’t).
d.
ASSEMBLY
1.
Using brass drift and hammer, tap new seal (6) until evenly seated in carrier (3).
2.
Position new preformed packing (5) in place on carrier (3).
e.
INSTALLATION
1.
Position carrier (3) with assembled parts in place in reverser housing (4).
2.
Install eight screws (1) and new lockwashers (2) in carrier (3) and reverser housing (4).
FOLLOW-ON TASKS:
•
Install clutch manual control lever (see paragraph 4-3).
TA701316
4-20
|
