|
| |
TM 5-2420-222-20-3
LOADER BACKHOE LEVEL INDICATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
25.
Bucket indicator
Two nuts (8 and 10)
a.
Using 11/16-inch open-end wrench,
rod (7) and loosen.
indicator pivot (9)
b.
If rod end is inside indicator guide
tube (4), screw forward along rod (7).
c.
If rod end is protruding from indicator
guide tube (4), screw toward rear along rod (7).
26.
Indicator guide
Bucket indicator
a.
Note relative positions.
tube (4)
rod (7)
b.
Repeat steps 25b, c, and 26 until end
is flush with end of tube (4).
27.
Bucket indicator
Two nuts (8 and 10)
Using 11/16-inch open-end wrench,
rod (7), and
tighten.
indicator pivot (9)
TASK ENDS HERE
TA243621
2-1843
|
