|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-LOADER BOOM CYLINDER ROD END OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
If installing loader control valve-to-left loader boom cylinder rod end oil line, skip step 32.
32.
Two hoses
Clamp (17)
Screw on and tighten to same relative
(15 and 16)
position as noted during removal using
1/4-inch flat-tip screwdriver.
33.
Adapter (18)
New packing (19)
Place in position.
34.
Loader boom
Adapter (18) with
Screw on and tighten using 1-inch
cylinder (20)
assembled
open-end wrench.
packing (19)
TA243542
2-1695
|
