|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-HYDRAULIC OIL FILTER RELIEF VALVE OIL LINE
This task covers:
a.
Removal (page 2-1662)
c.
Inspection/Replacement (page 2-1666)
b.
Cleaning (page 2-1664)
d.
Installation (page 2-1666)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 3/8-inch drive
One
Knife, pocket
Screwdriver, flat-tip, 1/4-inch
Equipment Condition
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 7/8-inch
1.
Hydraulic oil filter removed
Wrench, open-end, 1-inch
(page 2-1698)
(two required)
2.
Right platform removed (page 2-1079)
Materials/Parts
Detergent, GP (item 7, Appendix C)
Lockwasher, clamp screw
Packing, pipe nipple
Packing, long tee
Rags, wiping (item 21, Appendix C)
Solvent, drycleaning (item 28,
Appendix C)
Tags, marking (item 30, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both loader control valve-to-loader bucket cylinder head end oil lines are maintained
the same way except as noted. Left oil line is shown. Repeat procedures as needed for
right oil line.
2-1661
|
