|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-HYDRAULIC OIL FILTER RELIEF VALVE OIL LINE
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
36.
Loader backhoe
Hydraulic oil filter
Install (page 2-1346).
relief valve-to-
clutch control valve
adapter oil line
37.
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
38.
Engine
Start and run at high idle
(TM 5-2420-222-10).
39.
Loader control
a.
Operate loader controls (TM 5-2420-222-10)
valve-to-hydraulic
and check for leaks.
oil filter relief
b.
If leaking at any connection, tighten
valve oil line
using 1/4-inch flat-tip screwdriver,
7/8-inch, two 1-inch, and two 1 1/4-
inch open-end wrenches.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or oil line as outlined in
this task.
d.
If found leaking, repeat steps 37
thru 39.
40.
Engine
If still running, shut down
(TM 5-2420-222-10).
TASK ENDS HERE
2-1660
|
