|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-SPEED GEAR ASSEMBLY (REVERSER) SEAL DRAIN LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
18
Oil line (1) and
Clamp (6)
Place in position.
front support (5)
19
Front support (5)
Screw (7) and new
Screw in and tighten using 9/16-inch,
and clamp (6)
lockwasher (8)
3/8-inch drive socket, 5-inch extension,
and ratchet handle.
20
Elbow (9)
Nut (10)
Screw on all the way.
21
New packing (11)
Place in position.
22
Hydraulic pump (12)
Elbow (9) with
a
Unplug pump (12).
assembled parts
b
Screw in and tighten to position noted
during removal using 7/16-inch open-
end wrench.
23
Hydraulic pump (12)
Nut (10)
Using 7/16-inch and 1/2-inch open-end
and elbow (9)
wrenches, tighten until seated against
pump (12).
2-1373
|
