|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-SPEED GEAR ASSEMBLY (REVERSER) SEAL DRAIN LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
24
Elbow (1)
Oil line (2)
a
Take off tag.
b
Screw on and tighten using 7/16-inch
open-end wrench.
25
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
26
Engine
Start and run at high idle
(TM 5-2420-222-10).
27
Hydraulic pump-to-
a
Check for leaks.
speed gear assembly
b
If leaking at any connection, tighten
(reverser) seal
using 7/16-inch and 1/2-inch open-end
drain line
wrenches.
c
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or oil line as outlined in
this task.
d
If found leaking, repeat steps 25
thru 27.
28
Engine
If still running, shut down
(TM 5-2420-222-10).
2-1374
|
