|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-SPEED GEAR ASSEMBLY (REVERSER) SEAL DRAIN LINE
This task covers:
a.
Removal (page 2-1370)
c.
Inspection/Replacement (page 2-1372)
b.
Cleaning (page 2-1371)
d.
Installation (page 2-1372)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 3/8-inch drive, 5-inch
Rags, wiping (item 21, Appendix C)
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Knife, pocket
Tags, marking (item 30, Appendix C)
Pan, drain
Pliers, diagonal-cutting
Personnel Required
Pliers, slip-joint
Socket, 3/8-inch drive, 9/16-inch
One
Wrench, open-end, 7/16-inch
(two required)
Equipment Condition
Wrench, open-end, 1/2-inch
1. Right side grille removed
Materials/Parts
(TM 5-2420-222-10)
2. Right platform removed (page 2-1079)
Band, electrical tie down
(seven required)
Detergent, GP (item 7, Appendix C)
Lockwasher, clamp screw
Packing, elbow-to-hydraulic pump
2-1369
|
