|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP-TO-SPEED GEAR ASSEMBLY (REVERSER) SEAL DRAIN LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when draining hot fluids. Wear gloves to protect your hands from hot
parts and fluids or severe burns could result.
1
Elbow (1)
Oil line (2)
a
Place drain pan underneath.
b
Using 7/16-inch open-end wrench,
unscrew and take off.
c
Tag (page 2-137).
2
Elbow (1) and
Nut (4)
Using 7/16 and 1/2-inch open-end
hydraulic pump (3)
wrenches, loosen.
3
Hydraulic pump (3)
Elbow (1) with
a
Note relative position for proper
assembled parts
placement during installation.
b
Using 7/16-inch open-end wrench,
unscrew and take out.
c
Plug pump (3) (page 2-137).
4
Elbow (1)
Packing (5)
a
Using pocket knife, take off.
b
Get rid of.
5
Front support (6)
Screw (8) and
a
Using 9/16-inch, 3/8-inch drive
and clamp (7)
lockwasher (9)
socket, 5-inch extension, and ratchet
handle, unscrew and take out.
b
Get rid of lockwasher (9).
6
Front support (6)
Clamp (7)
Take off.
and oil line (2)
7
Oil line (2)
Seven electrical
a
Note locations for proper placement
tie down bands (10)
installation.
b
Using diagonal-cutting pliers, cut off.
c
Get rid of.
8
Straight
Oil line (2)
a
Place drain pan underneath.
adapter (11)
b
Using two 7/16-inch open-end
wrenches, unscrew and take off.
c
Allow fluid to drain into drain pan.
d
Tag (page 2-137).
e
Get rid of drained fluid (page 2-137).
2-1370
|
