|
| |
TM 5-2420-222-20-3
HYDRAULIC OIL COOLER-TO-CLUTCH CONTROL VALVE OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
31
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
32
Engine
Start and run at high idle
(TM 5-2420-222-10).
33
Hydraulic oil
a
Check for leaks.
cooler-to-clutch
b.
If leaking at any connection, tighten
control valve
using 9/16-inch box wrench or 1/4-inch
oil line
flat-tip screwdriver.
c.
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
hose, hose clamp, or oil line as
outlined in this task.
d.
If found leaking, repeat steps 31
thru 33.
34
Engine
If still running, shut down
(TM 5-2420-222-10).
NOTE
FOLLOW-ON MAINTENANCE: Install right side grille (TM 5-2420-222-10).
TASK ENDS HERE
2-1368
|
